Badger Basket Camping Equipment 08100 User Manual

ASSEMBLY INSTRUCTIONS

Save these instructions for future use.

D, E

MODEL #: 08100

NAME: Birdnest Tote Bed

PARTS INCLUDED:

(A) 1 - Tote Bed

(B) 4 - Plastic Support Ribs

(D) 1 - Fabric Sheet

(E) 1 - Mattress

BEFORE YOU

BEGIN

PICTURE 1

ASSEMBLY:

Ensure that all the

parts and hardware

listed are included.

If anything is missing, please do

not return the product to the store.

E-mail parts1@badgerbasket.com

for assistance.

STEP 1: See PICTURE 1. Remove the SHEET and

MATTRESS (D, E) from the TOTE BED (A). Remove

the inner fabric liner from inside the TOTE BED (A) by separating the hook

and loop tape around the top, inner edge. Insert the FOUR RIB SUPPORTS

(B) into the vertical pockets on the inside of the TOTE BED (A). There is

one at the head, one at the foot, and one on either side. Replace the fabric

inner liner by refastening the hook and loop tape. Replace the sheet and

mattress inside the bed.

PICTURE 2

STEP 2: See PICTURE 2. Join the zipper pull on the HOOD (C) to the

zipper on the top edge TOTE BED and zip around the full edge of the hood/

bed. The hood can be removed and reattached at any time. The BIRDNEST

TOTE BED is now assembled! Be sure to review the safety instructions on

PAGE 2!

Toll-Free Customer Service: 1-800-236-1310 (Monday through Thursday 7:30 AM to 4:30 PM CST)

Mail: PO Box 227, Edgar, WI 54426-0227 • Phone: 715-352-2311 • Fax: 715-352-3163

Page 1 of 2

1.1/0608